2017-04 Db2 ZPARM : Small ZPARM – Big effect!

Do you know how important it is to check the ZPARM EDM SKELETON POOL size to improve your I/O rate and lower your CPU?

Do you know how to set it?

From the frontline

I was checking and verifying our WorkLoadExpert (WLX) system at a customer’s site recently, and was struck by the size of the EDMPOOL Static SQL Cache.

SSC to you

I call this the „SSC“ (Static Statement Cache). What was *really* weird, is that it contained only about 450 statements – even though the EDMSTMTC was set to 1,500,000 KB !!! The Dynamic Statement Cache (DSC) contained about 38,000 Statements.

Different Horses, Different Courses

Now at the same time I happened to get an e-mail from our technical support, which contained a summary of a DSC and a SSC Snap at another customer site. They were getting 50,000 SSC statements, however the DSC size was 4,000,000 KB. This got me seriously wondering about why the SSC was so low at my current site…

Time to upgrade your EDMPOOL!

As luck would have it, an IBM Technical guy was also on site, and so we both peered into the innards of Db2.  I noticed right away that the I/O rate for the EDM SKELETON POOL was *crazy* high! The ZPARM EDM_SKELETON_POOL was set to 10,000 KB which is *crazy* low! (The default is 10,240 KB) We agreed to raise it to 150,000 KB on one member and, if all ok, roll out the change to all the other members in the Group.

Changeable online ZPARM and instantly used

It is an online changeable ZPARM that is instantly used, and as we watched, we saw the I/O to the EDM_SKELETON_POOL dropping and dropping and dropping until it flat lined! Yep – we got the I/O down to zero. Just think of the pay back saving Db2 from searching for free chains, externalizing IFCIDs etc.

Not just SSC got a boost

What I then noticed was that the DSC usage improved too! Why? Well remember that all SQL needs to be “attached” to a package? Normally a “dummy” like SYSLH… is one of many. But even these packages must be in the pool. When they are cast out then the related DSC entries are *also* cast out!

Big Bottom Line

End of the lesson was:


  • DSC now contains 78,000 SQLs

  • SSC now contains 70,000 SQLs

  • I/O rate to EDM_SKELETON_POOL effectively Zero

  • IFCID 401 (Flushed static SQL) from 3,200,000 per hour down to Zero

  • IFCID 316 (Flushed dynamic SQL) from 36,000 per hour down to 4,000

Just stop to think what this means for the System-wide CPU and I/O rates…

Check it now!

Set the Db2 ZPARM EDM_SKELETON_POOL size

Please check your EDM_SKELETON_POOL size now, introduced in Db2 9, with a default value of 10,240

 Increase it to at least 150,000 if you can!  –

 

As usual, if you have any comments or queries please feel free to drop me a line!

TTFN

Roy Boxwell

 


Mehr über Db2 SQL Workload Analyse

SQL Workload Expert for Db2 z/OS offers a complete review of all KPIs (CPU, elapsed, IO etc.) from all SQL (Dynamic and Static) that have executed on the entire system.


Rotten Results from RUNSTATS Require Rescue

Do you know the basic rules to ensure access path stability when using RUNSTATS?

DB2 z/OS Access path stability: Time for another of my “I noticed something strange at a customer site recently” Newsletters. Enjoy!

 

RUNSTATS are good aren’t they?

At this particular site, the RUNSTATS methodology of RUNSTATS was, shall we say, “sub-optimal.” They use an ancient system to decide when to RUNSTATS, and they do tablespace’s and index’s *never* at the same time. Just to complicate matters even more, they never use inline RUNSTATS because “if the REORG abends, the statistics in the DB2 catalog are dead”. Now you are all probably well aware of the scale of the disaster at this site?

 

Daily fire fighting

Nearly every day, some access path somewhere goes horribly wrong… the under- manned and over-worked DBA group are tasked to find and fix ASAP. Cures range from a quick INDEX create or change, or perhaps even a really needed RUNSTATS or REORG.

 

Why do the Access Paths go “wrong”?

The real goal is to stop firefighting and to investigate the root cause. Why do so many access paths go wrong on such a regular basis? The answer is the systemic horribleness of RUNSTATS collection. Dynamic SQL is, obviously, very very sensitive to RUNSTATS. For one thing, the statements are kicked out of the cache! The very next time they come back, the DB2 Optimizer redrives the cost calculations and “Hey Presto!” you have a bad access path. Terry Purcell and Pat Bossmann have often said that about 90% of DB2 performance problems stem from bad RUNSTATS. The old adage “garbage in – garbage out” is still true!

 

Timing is everything

The timing of the RUNSTATS is critical for stable access paths.

Basic rules are:

 1 Only do a RUNSTATS if you really really need to!
a. RUNSTATS are not cheap!
b. The Dynamic Statement cache gets wiped
c. Locks on the Catalog can occur
2Avoid doing RUNSTATS even if RTS says to run one!
a. Lots of people use the incorrect counters to trigger a RUNSTATS. Use the correct ones for the correct Object type
b. Never RUNSTATS LOB spaces – completely pointless work!
c. Even if a MASSDELETE has occurred do you really want to “reset” the DB2 catalog statistics?
d. VOLATILE tables must be handled with *extreme* care!
3Choose your RUNSTATS parameters wisely!
a. Doing a blind “RUNSTATS the world” is just as bad as running an empty RUNSTATS!
b. HISTOGRAM should be used with caution
c. More than a hundred COLGROUPs should start alarm bells ringing

Quite a list here, and it really only shows some „Rules of Thumb“. I’ll bet you all have you own?

Is there a way back from the abyss?

But what happens if you have 1000’s of partitions with terabytes of data and the RUNSTATS was, shall we say, ill-advised or badly timed? Can you go back in time? Hands up those who wants to do a PiT recovery on the production catalog! No takers???

Yes! There is a way back from the abyss

I’ll bet you are all well ahead of me here, but the way to do this is pretty straightforward. You simply acquire our latest tool, RUNSTATS Rescue, to handle it all for you. Or, you could try and reset the data in the DB2 catalog from off-line backups that you happen to have taken before the RUNSTATS that is now killing you. …You did do that, right?

Why a tool?

Apart from the fact that this tool is from us, my firm, just trying to “roll your own” can be a real nightmare. Why?

  • Because you must first find out all of the objects that were touched by the badly performing SQL.
  • Then you must get all of the DB2 Optimizer relevant data back from a point in time before the RUNSTATS executed, and/or the last REBIND(s),
  • and then you must flush the dynamic statement cache and REBIND any static SQL.

Sounds like a lot of work.

What else must you do?

You also have to be transparent and so log what you do. You must allow for the ability to back-out your changes as perhaps you make another access path even worse. And it would be really cool if you could do “on the fly” explains to check that the RUNSTATS really *is* the root of all that evil. Remember that ZPARMS and BUFFERPOOLS also have a major influence on access paths. Even the speed of your machine! It is also a must to then be able to go even further back in time – perhaps as much as a year?

Hang on – What about PLAN STABILITY?

Doesn’t plan stability save you? I hear you all cry. Well, “No” is the short answer! If your package is invalidated by a Schema change (the classics are index drop and recreate or VIEW change), then plan stability does not work anymore. Further, in DB2 12, Dynamic Plan Stability has been announced. Sadly it *also* fails right here as there is no SWITCH PREVIOUS/ORIGINAL support!

It all works together

So, for the static SQL case where the package is not invalided, Plan Stability is good. If not: – RUNSTATS Rescue to the rescue. For Dynamic SQL – RUNSTATS Rescue is the answer.

As always, any questions or comments would be most welcome!

TTFN,

Roy Boxwell

 

BIF HealthCheck Licensed Freeware for DB2 10

Detect static and dynamic SQL and match to the relevant collection, packages,…

BIF/ICI HealthCheck overview (Built-in Function Checker for DB2 z/OS)

BIF/ICI HealthCheck reports the following BIF incompatibilities in DB2 10

  • Execution of the DB2 9 for z/OS version of SYSIBM.CHAR(DECIMAL-EXPR)
  • Execution of the DB2 9 for z/OS version of SYSIBM.VARCHAR(DECIMAL-EXPR), CAST (DECIMAL AS VARCHAR), OR CAST (DECIMAL AS CHAR)

  • Use of an unsupported character string representation of a TIMESTAMP
  • Use of a USER-DEFINED FUNCTION (UDF) that has the unqualified name ARRAY_EXISTS
  • Use of a USER-DEFINED FUNCTION (UDF) that has the unqualified name CUBE
  • Use of a USER-DEFINED FUNCTION (UDF) that has the unqualified name ROLLUP

  • Execution of a non-Java client that called a Stored Procedure (SP) that is on the DB2 for z/OS Data Server, while subsystem parameter DDF_COMPATIBILITY was set to SP_PARMS_NJV (the Data Server returned output argument values whose data types matched the data types of the call statement arguments).

  • Execution of a SQL statement by a client non-Java application that included an unsupported conversion from a string type to a numeric type, while the DB2 z/OS Data Server environment was one of the following (the Data Server issues SQLCODE -301)
    • In version 10 Conversion Mode (CM)
    • In version 10 New-Function Mode (NFM) and implicit casting was disabled because subsystem parameter DDF_COMPATIBILITY was set to SP_PARMS_NJV, or DISABLE_IMPCAST_NJ

 

BIF/ICI incompatibilities in DB2 11

 

Mehr über BIF

BIF-Usage

Präsentation

BIF KompatibilitätDB2 10 Kompatibilität Mode

Änderungen bei der STRING Formatierung von Decimal Data bei der CHAR und VARCHAR built-in Funktion und bei der CAST Spezifikation mit CHAR und VARCHAR Ergebnis Typen sowie UNSUPPORTED TIMESTAMP STRINGs.

White PaperWo sind die BIFs?
Finding BIFs (engl)
Wo sind die BIFs? Und wie können wir in Zukunft problemlos mit BIFs leben?
Wege aus der mangelnden Aufwärtskompatibilität bei der Migration von DB2 Versionen
Newsletter2015-01 – BIFCIDS – Where’s the BIF? (engl.)How will you deal with loop-hole usage in production code?
VideoBIF Usage (engl)(11min.) Trap  and correct the BIFs that will cause belly-ache one day soon
„Give and Take
Program“
Seite
Give and Take
Program
We have „GIVEn“ various free-of-charge Use Cases from SQL Workload Expert for DB2 z/OS like
1  Index Maintenance Costs
2  EXPLAIN Suppression
3  BIF Usage 
BIF HealthCheck – This last one is still available
We TAKE the anonymized results for research
and will communicate with the local User Groups for discussions
BIF Usage

„Give and Take
Program 3“

Kundenmeinungen
Präsentation


Customer Comments
Lesen Sie die Kundenmeinungen aus unterschiedlichen Industrie Sektoren

  • Gesetzliche Krankenversicherung
  • Automobil Industrie
  • IT Provider für Banken
  • Versicherungen

 

 

BIF HealthCheck Licensed Freeware for DB2 11

Detect static and dynamic SQL and match to the relevant collection, packages,…

BIF HealtchCheck overview (Built-in Function Checker for DB2 z/OS)

BIF HealthCheck reports the following BIF incompatibilities in DB2 11

  • Execution of the DB2 9 for z/OS version of SYSIBM.CHAR(DECIMAL-EXPR)
  • Execution of the DB2 9 for z/OS version of SYSIBM.VARCHAR(DECIMAL-EXPR), CAST (DECIMAL AS VARCHAR), OR CAST (DECIMAL AS CHAR)

  • Use of an unsupported character string representation of a TIMESTAMP
  • Use of the DB2 10 for z/OS default SQL path instead of the V11 path, which has more implicit Schemas

  • Execution of a non-Java client that called a Stored Procedure (SP) that is on the DB2 for z/OS Data Server, while subsystem parameter DDF_COMPATIBILITY was set to SP_PARMS_NJV (the Data Server returned output argument values whose data types matched the data types of the call statement arguments).
  • Execution of an insert statement that inserts into an XML column without the XMLDOCUMENT function, which generates SQLCODE -20345 on a DB2 release prior to V11, but does not generate an error starting in V11

  • V10 XPATH evaluation behavior was in effect, which resulted in an error (e.g. a data type conversion error occurred for a predicate that would otherwise be evaluated to false.). Starting in V11, such errors might be suppressed

  • Execution of a SQL statement by a client non-Java, or Java application that included an unsupported conversion from a string type to a numeric type, or from a numeric type to a string type while the DB2 z/OS Data Server environment was one of the following (the Data Server issues SQLCODE -301)

o The Data Server was in version 11 New-Function Mode (NFM)
o APPLICATION COMPATIBILITY was set to V10R1
o Implicit casting was disabled because subsystem parameter DDF_COMPATIBILITY was set to SP_PARMS_NJV, or DISABLE_IMPCAST_NJV

BIF incompatibilities in DB2 10

 

Mehr über BIF

BIF-Usage

Präsentation

BIF KompatibilitätDB2 10 Kompatibilität Mode

Änderungen bei der STRING Formatierung von Decimal Data bei der CHAR und VARCHAR built-in Funktion und bei der CAST Spezifikation mit CHAR und VARCHAR Ergebnis Typen sowie UNSUPPORTED TIMESTAMP STRINGs.

White PaperWo sind die BIFs?
Finding BIFs (engl)
Wo sind die BIFs? Und wie können wir in Zukunft problemlos mit BIFs leben?
Wege aus der mangelnden Aufwärtskompatibilität bei der Migration von DB2 Versionen
Newsletter2015-01 – BIFCIDS – Where’s the BIF? (engl.)How will you deal with loop-hole usage in production code?
VideoBIF Usage (engl)(11min.) Trap  and correct the BIFs that will cause belly-ache one day soon
„Give and Take
Program“
Seite
Give and Take
Program
We have „GIVEn“ various free-of-charge Use Cases from SQL Workload Expert for DB2 z/OS like
1  Index Maintenance Costs
2  EXPLAIN Suppression
3  BIF Usage 
BIF HealtchCheck (Freeeware)– This last one is still available
We TAKE the anonymized results for research
and will communicate with the local User Groups for discussions
BIF Usage

„Give and Take
Program 3“

Kundenmeinungen
Präsentation

Inspiring experiences

[Customer Comments]

Lesen Sie die Kundenmeinungen aus unterschiedlichen Industrie Sektoren

  • Gesetzliche Krankenversicherung
  • Automobil Industrie
  • IT Provider für Banken
  • Versicherungen

GIVE and TAKE Programme 1, 2, 3


Give and Take 2020

Information on the Give and Take Programs 4,5,6,7


 

Previous Give & Take

We have „GIVEn“ various free-of-charge Use Cases from our SQL WorkloadExpert for Db2 z/OS like:

  1  Index Maintenance Costs

  2  EXPLAIN Suppression

  3  BIF Usage

Limited free-of-Charge Db2 Application

This Program started in Europe, during our 30th anniversary was such a success, that it is now being Extended for the benefit of North American Db2 z/OS sites.

SQL WorkloadExpert for Db2 z/OS (WLX) contains several “Use Cases”. We provided three of them, free of charge, for one month to different sites.

In return, we received their results. We’d like to share this inspiring experiences with you now.


Inspiring experiences

We TAKE the anonymized results for research

and will communicate with the local User Groups for discussions

Kundenmeinungen

3BIF USAGE
News
Lesen Sie die Kundenmeinungen aus unterschiedlichen Industrie Sektoren     [Customer Comments]

 

  • Gesetzliche Krankenversicherung
  • Automobil Industrie
  • IT Provider für Banken
  • Versicherungen

Erste Ergebnisse von Db2 z/OS Kunden

1Index Mantenance CostsNearly all the data we got back showed a positive result for created Indexes…
2EXPLAIN SuppressionAbout 10% of SQLs are actually “left over”…
3BIF Usage When migrating to a new Db2 version, the BIFs are not always compatible and an extreme amount of data is produced.

 

The difficulty of near-time analysis to track down BIFs within dynamic SQL have been solved with the BIF Usage Use Case…

[Ergebnisse von Db2 z/OS Kunden (engl)]

Program 3 – BIF Usage   

BIF-Usage

 

Präsentation

BIF KompatibilitätDb2 10 Kompatibilität Mode

 

Änderungen bei der STRING Formatierung von Decimal Data bei der CHAR und VARCHAR built-in Funktion und bei der CAST Spezifikation mit CHAR und VARCHAR Ergebnis Typen sowie UNSUPPORTED TIMESTAMP STRINGs.

White PaperWo sind die BIFs?
Finding BIFs (engl)
Wo sind die BIFs? Und wie können wir in Zukunft problemlos mit BIFs leben?
Wege aus der mangelnden Aufwärtskompatibilität bei der Migration von Db2 Versionen
Newsletter2015-01 – BIFCIDS – Where’s the BIF? (engl.)How will you deal with loop-hole usage in production code?
VideoBIF Usage (engl)(11min.) Trap  and correct the BIFs that will cause belly-ache one day soon

BIF Usage Video